U-Boot 1.1.3 (Oct 14 2005 - 10:30:31)
 
MPC8272 Reset Status: External Soft, External Hard
 
MPC8272 Clock Configuration
 - Bus-to-Core Mult 4.5x, VCO Div 2, 60x Bus Freq  22-65 , Core Freq 100-300
 - dfbrg 1, corecnf 0x17, busdf 3, cpmdf 1, plldf 0, pllmf 3
 - vco_out  400000000, scc_clk  100000000, brg_clk   25000000
 - cpu_clk  450000000, cpm_clk  200000000, bus_clk  100000000
 - pci_clk  100000000
 
CPU:   MPC8272 (HiP7 Rev 14, Mask 1.0 0K50M) at 450 MHz
Board: Motorola MPC8272ADS
DRAM:  64 MB
FLASH:  8 MB
In:    serial
Out:   serial
Err:   serial
Net:   FCC2 ETHERNET
Hit any key to stop autoboot:  0
=>
=> printenv
bootdelay=5
ethaddr=00:04:9f:11:22:33
bootcmd=bootm fe600000
baudrate=9600
hostname=ads8272
kernel_addr=0x200000
rootpath=/opt/eldk/ppc_6xx
nfsboot=tftp $kernel_addr uImage; run nfsargs ; bootm
nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:eth0:off
multi_addr=0x200000
multiboot=tftp $multi_addr uMulti;setenv bootargs root=/dev/ram rw;bootm
ethact=FCC2 ETHERNET
load=tftp 0x200000 u-boot.bin
fileaddr=200000
gatewayip=10.0.0.1
netmask=255.255.0.0
ipaddr=10.0.1.55
serverip=10.0.0.107
update=protect off 0xff800000 0xff83ffff;erase 0xff800000 0xff83ffff;cp.b 0x200000 0xff800000 $filesize
stdin=serial
stdout=serial
stderr=serial
 
Environment size: 704/262140 bytes
=>